New HUD Mirror Car Head Up Display C500 Windshield Speed Projector Security Alarm Water temperature Overspeed RPM Voltage Clock

$42.23
In stock
SKU C500

HUD short for Head Up Display.It displays driving datas on the front windshield such as speed,RPM,water temperature,voltage on the car front window glass;avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.

C500_01C500_02C500_03C500_04C500_05C500_06C500_09C500_10C500_11C500_12C500_14C500_15C500_16

Product Description

 

Overview

 

HUD short for Head Up Display.It displays driving datas on the front windshield such as speed,RPM,water temperature,voltage on the car front window glass;avoiding drivers unsafety because of watching the instrument while driving.Drivers can read the driving information instantly , and can always keep the best state on the way with HUD.

 

Functions

未标题-1

1.Alarm Icon: High water temperature / Low voltage alarm / shift reminder / over speed alarm / Fatigue driving / Engine Error

 

2.Multi-functions display: RPM / Voltage / driving distance /clock / water temperature / fuel consumption

 

3.Light sensor:HUD can automatically adjust the brightness according to the environment

 

4.Mileage unit:TRIP means the driving distance from engine start to off

 

5.Fuel consumption unit: unit of Average fuel consumption per hundred kilometers / instantaneous fuel consumption =AVG

 

6.Speed:digital display the vehicle driving speed

 

7.Speed unit :KM/H=kilometer/hour, MPH=Mile/hour

 

Troubleshooting

 

1.The screen without any display,and no power

Start the car engine;check if the OBD cable line is tight;please pull down the OBD cables more times to ensure;check if product power switch turns on. If still no display ,please change another car to test, analyze whether the car OBD diagnostic interface is good, if it is not good,please repair it and try again.

 

2.Only shows voltage and be automatic power off after 60 second when the device is with power

this product just available for cars with OBD2 agreement and EU-OBD agreement(European region: after 03 years, Other region:after 07 years)

This Products donnot support JOBD and OBDI and recommended test for another car.

 

3.See not clearly when HUD under the sunlight

When HUD is power on,vertical press in the wave button 5 seconds to enter into menu option,short press 8 times to menu 8, adjust the default from 0 to 11 (11 is the brightest) ,and vertical press 5 seconds to save.

 

4.Wrong operation lead to crashes or inaccurate datas

Do a reset setting.

When HUD is power on,vertical press in the button for 5 seconds to enter into the menu option,short press several times to the menu 13,adjust the parameter to 1,vertical press in 5 seconds to save.

5.Inaccurate Speed

a.First check the speed unit is correct or not, the speed unit including KM/H and MPH, menu 9 can adjust the speed unit

b.When HUD is power on,vertical press the wave button 5 seconds to enter into the menu options, and find menu 0,parameter shows 107,up or down the wave button to increase or decrease the value according to the difference until it shows correct one.After adjustment, vertical press in 5 seconds to save it.

 

6.Inaccurate RPM

When HUD is power on,vertical press the wave button 5 seconds to enter into the menu 1, parameter shows 100,up or down the wave button to increase or decrease the value. After adjustment, vertical press in 5 seconds to save it.

 

7.Inaccurate fuel consumption

The unit for fuel consumption is L/100KM, HUD display is the single driving fuel consumption, while car display is Integrated average driving fuel consumption, so it is normal if there are difference.

 

HUD display three kinds of fuel consumption

 

a.Idle mode: HUD display Instantaneous fuel consumption per hour (L/H), it means HUD can figure out how much oil the car will consumed when start engine after one hour

b. Driving mode: HUD display Instantaneous fuel consumption of 100KM

c. Finish driving: HUD display is average fuel consumption of 100KM, when turn off the car, HUD will auto turn off in 10s

 

When HUD is power on,vertical press the wave button 5 seconds to enter into menu option, find menu 2 ,the parameter shows 100,up or down to adjust.

 

8.HUD cannot be automatically power off in cars with Start Stop function or when turn off the car, HUD speed and RPM is not 0

1. If the car is with Start Stop function, find menu 12, adjust the parameter to 13.2 (when car voltage is less than 13.2V, HUD will turn off automatically in 3 minutes)

2. If HUD turn off during driving, find menu 12, adjust the parameter to 12.6 or 12.8

3. If HUD restart after turn off, find menu 12, adjust the parameter to 13.6

 

9. How to adjust the clock?

When HUD is in the normal display mode, short press in to find clock, long push up the

button the clock will flash, short push up to adjust the minutes, short press in can adjust the hours, after finish adjust the clock, long press in 5s to save and exit.

Write Your Own Review
You're reviewing:New HUD Mirror Car Head Up Display C500 Windshield Speed Projector Security Alarm Water temperature Overspeed RPM Voltage Clock
Your Rating

Our Brands

Lorem Khaled Ipsum is a major key to success.